Filter
Top Products
6
Setting the IP Address using the Em.exe Utility3.
The Em.exe is a Microsoft Windows based utility used to identify the
adapters connected on the same subnet and network segment. To
run the Em.exe utility, please insert the driver CD supplied with the
Adapter. Open the program at the following location (assume the
CD-ROM drive is at E):
E:\IO_over_IP\Utilities\Em\Em.exe
Managing the Adapter Settings
When you enter the Adapter Setup Menu, the following page will be
available for your access. By default there is no password for entry.
Once you have entered the Controller Setup Menu and made the
necessary changes, click the Update button. Also ensure that you
make note of your password as you will need it to enter the setup menu
again.