Filter
Top Products
Instruction Manual
1
Introduction
Make the jump to Serial ATA performance with a four-port RAID card from StarTech.com. You get
four RAID-ready internal Serial ATA ports for your high performance Serial ATA hard drives. Whether
you need Striping (RAID 0), Mirroring (RAID 1), or both (RAID 0+1), this card has you covered.
The PCISATA4R1 also supports RAID 1+S (Mirrored-Sparing), which automatically replaces a failed
hard drive and rebuilds the system if a booting hard drive fails.
It also includes a low prole bracket for adapting to slimline or small form factor system applications.
Plus, guaranteed performance backed by our lifetime warranty and FREE lifetime tech support
makes this the perfect upgrade for power users.
Packaging Contents
• 1 x PCI SATA RAID controller card
• 1 x Low prole bracket
• 1 x Installation CD
• 1 x Instruction Manual
System Requirements
• An available PCI or PCI-X slot
• Microsoft® Windows® 2000/ XP(32/64-bit)/ 2003 Server(32/64-bit)/ Vista(32/64-bit)/ Server 2008
R2/ 7(32/64-bit)
• An internal SATA cable for each hard drive
Installation
Hardware Installation
1. Turn your computer o and any peripherals connected to the computer (ie. Printers, external
hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of the
computer.
2. Remove the cover from the computer case.
3. Locate an open PCI or PCI-X slot and remove the metal cover plate on the rear of the computer
case.
4. Insert the card into the open PCI or PCI-X slot and screw the bracket to the rear of the case.
5. Place the cover back onto the computer.
6. Insert the power cable into the socket on the power supply.