Filter
Top Products
Instruction Manual
3
Accessing the RAID BIOS Utility
The PCISATA4R1 comes with an integrated BIOS-level conguration utility that allows you to
congure the RAID setup, rebuild your array in the event of failure, and resolve conicts with the
arrays you have setup. Once you have installed the card according to the instructions and attached
the SATA drives you wish to use with the card, you can then congure the type of array you would
like to use.
To enter the conguration utility, press and hold [CTRL] and [S] at the same time (or press [F4]) when
you see the following prompt:
NOTE: At least one SATA drive must be installed for you to access the RAID BIOS utility. Once you
access the utility, you will be presented with the following menu: