Filter
Top Products
Instruction Manual
2
Installation
Please note: If you are performing a new operating system installation
and wish to boot from one of the drives being connected to PEXSATA22I,
please copy the following files from the included Driver CD to a blank
floppy disk that can be used during OS installation:
jgogo.sys
jraid.cat
Jraid.sys
jraid_f.inf
txtsetup.oem
For further instruction on how to install the card and necessary drivers
for use with a fresh (boot) OS drive, please skip to the section entitled
Windows Vista™ Fresh Installation or Windows 2000/XP/2003 Server
Fresh Installation as applicable. Otherwise, if you will be installing
PEXSATA22I to connect a secondary (non-boot) drive, proceed as
follows:
Shut down all power connected to the computer, as well as all 1.
devices connected to the computer peripherally (i.e. Printers,
Monitors, Scanners etc.). As an added step to ensure safe
installation, unplug the power supply from the computer.
Remove the computer cover, allowing access to the motherboard 2.
and available slots. For more detailed instruction on how to perform
this step, please refer to the documentation that was included with
WARNING! PCI Express cards, like all computer equipment,
can be severely damaged by static electricity. Be sure that you
are properly grounded before opening your computer case or
touching your card. StarTech.com recommends that you wear an
anti-static strap when installing any computer component. If an
anti-static strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface
(such as the computer case) for several seconds. Also be careful
to handle the card by its edges and not the gold connectors.