Filter
Top Products
Monitoring Your Card
The LEDs on the front of the card are the best indication of the card’s activity:
Tips for Setting Up Your Network
For information and help on setting up your network, please consult the manufacturer of
your operating system. The following section details troubleshooting steps only and is
intended for Microsoft users on a local area network.
Make sure your computers are configured properly
For your convenience, you should configure each of your computers so that they can
“see” each other and share devices and files. To do this, you have to make sure that the
following have been installed on your computers:
• Client for Microsoft Networks
• TCP/IP (Internet Protocol)
• File and Print Sharing
These clients, protocols, and services can be found in the following locations:
Windows Vista
1. From the Control Panel, click on Network and Sharing Center.
2. Click Manage Network Connections.
3. Right-click on Local Area Connection and choose Properties.
Windows XP
1. Click on Start, then click My Network Places.
2. Click View Network Connections in the Network Tasks box.
3. Right-click on Local Area Connection and choose Properties.
Windows 2000
1. Click on Start, then Settings, then Network and Dialup Connections.
Instruction Manual
4
LED Color State Indication
1000/ACT
Green
On Connection at 1000Mbps
Flashing Sending/Receiving Data
100/ACT
Green
On Connection at 100Mbps
Flashing Sending/Receiving Data