Sterling SVL-D Webcam User Manual


 
SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 12 of 49
2-2 Installing the Material Receiver
The self contained material loader can be installed directly on the processing
machine.
Make sure that all connections are tight so that the conveying performance is not
impaired. The material receiver is equipped with a mounting flange.
Depending on the position, drill the holes for fastening the
conveyor hopper to the processing machine. One of 2
standard bolt patters may be used, sight glass or bin
mounted.(as shown in fig. 2.4)
Mount the material receiver on the processing machine.
Install the vinyl flexible hose on the material receiver inlet
and on the venturi assemblies using the hose clamps that
are supplied.
Make sure all equipment is properly grounded to minimize
static and risk of shock.
Note: The hopper should not touch any other component.
Figure 2.4
(not to scale)
Sight Glass Mounting Flange Bin Mount Mounting Flange