Filter
Top Products
SVL-A, SVL-B, SVL-C, & SVL-D Self-Contained Material Loaders - Venturi Style 9 of 49
• Observe the safety instructions for the connected units.
Maintenance Responsibility
• Before beginning maintenance work:
Assign a supervisor.
Inform all other responsible operating personnel.
Turn off the main power supply.(If required)
Set all compressed air lines on the unit at zero pressure.
Repair work should ONLY be done by qualified personnel.
• ALWAYS turn off the main supply for all electrical work to avoid risk of death
or injury.
• NEVER operate on a unit that is partially disassembled. This can cause
serious injuries including amputation and electric shock.
• In case of functional disturbances, switch the unit off IMMEDIATELY. Any
errors must be eliminated to avoid accidents.
1-4 Unit Safety
• The unit may ONLY be used for conveying plastic granules and regrind on
injection molding machines.
• NEVER change the settings unless you are able to foresee the
consequences.
• Use ONLY original manufacturer parts.
• Follow a regular maintenance schedule.
• Keep records of all maintenance and repair work.
• Be aware that electronic subassemblies may be damaged by static
discharge.
• Before initial operation and at regular intervals, check all electrical
connections for proper fit.
• NEVER modify sensors without knowing their precise functions.
• Make sure all plugs are connected properly.
• Note the carrying capacity of the machine flange.
• Read the operating manuals of the connected units.