Filter
Top Products
Chapter 6 Configuring VLANs 33
In this example, two bonds (bond0 and bond1) are configured:
Refer to Linux documentation for more information.
▼ To Remove Bonding
● Use the rmmod command to remove bonding:
# modprobe bonding mode=balance-rr miimon=100 max_bonds=2
# ifconfig bond0 192.2.2.15 netmask 255.255.255.0 broadcast 192.2.2.255
# ifenslave bond0 eth4 eth5
# ifconfig bond1 193.2.2.15 netmask 255.255.255.0 broadcast 193.2.2.255
# ifenslave bond1 eth6 eth7
# rmmod bonding