Filter
Top Products
User’s Manual - 15
Copyright(c) 2004, Sun Microsystems, Inc. All rights reserved.
On-Screen Display
OSD How to adjust
The menu will automatically turn off if no adjustments
are made for a certain time period.
You can set the amount of time the menu will wait before
it turns off.
1. Push the Menu button.
2. Push the [-] button or [+] button until the Menu Display
Time screen is displayed.
3. Push the Menu button to open the Menu Display Time
selection screen.
4. Use the[-] or [+] buttons to select 5, 10, 20, 50, 200 seconds.
20 seconds is the default value.
Select Auto Source Select for the monitor to automatically
select the signal source. Select Manual Source Select to
manually select the signal source using the Source
button.
You can see the frequency, the polarity of the operational
signals and the resolution level.
1. Push the Menu button.
2. Push the [-] button or [+] button until the Source Select
screen is displayed.
3. Push the Menu button to open the Source Select selection
screen.
4. Use the [-] button or [+] button to select Auto or Manual.
Menu Display Time
Menu Display Time
5 10 20 50 200
(Seconds)
Menu Display Time
5 10 20 50 200
(Seconds)
Menu Display Time
Source Select
Source Select
64.0kHz 60Hz PP
1280 x 1024
Analog
Manual
Auto
Source Select