Filter
Top Products
Appendix D Installing the Sun 10-Gigabit Ethernet Device Driver on Linux Platforms 55
7. Verify that the driver is loaded.
In the following example, the ixge driver is shown in bold italic. On your
system the driver will be indistinguishable from the other modules.
8. Run the dmesg command to see which devices the ixge driver was mapped to:
9. Add the ixge interfaces to the /etc/modules.conf file.
# lsmod
Module Size Used by Not tainted
ixge 53592 0 (unused)
ide-cd 36616 0 (autoclean)
ipv6 285176 -1 (autoclean)
key 78344 0 (autoclean) [ipv6]
st 31380 0 (autoclean) (unused)
sr_mod 16812 0 (autoclean) (unused)
cdrom 34664 0 (autoclean) [ide-cd sr_mod]
sg 40384 0 (autoclean)
joydev 7136 0 (unused)
evdev 6496 0 (unused)
input 7488 0 [joydev evdev]
usb-ohci 23728 0 (unused)
usbcore 87648 1 [usb-ohci]
bcm5700 194456 1
lvm-mod 81248 0 (autoclean)
reiserfs 248344 1
mptscsih 44144 2
mptbase 46400 3 [mptscsih]
sd_mod 16192 4
scsi_mod 133028 5 [st sr_mod sg mptscsih sd_mod]
# dmesg
10-Gigabit Ethernet Adapter Driver - version 1.0.100.3
Copyright (c) 1999-2005 Intel Corp., Sun Corp.
divert: allocating divert_blk for eth2
eth2: Sun 10-Gigabit Ethernet Adapter Driver
alias eth2 ixge
alias eth3 ixge