SUPER MICRO Computer 6026TT-GTRF Server User Manual


 
C-1
Appendix C: System Speci cations
Appendix C
System Speci cations
Note: unless noted speci cations apply to a complete system (two serverboards).
Processors
Four Intel® 5600/5500 Series processors in LGA1366 sockets
Note: Please refer to our website for details on supported processors.
Chipset
Intel 5500/ICH10R (X8DTT-HF+)
Intel 5520/ICH10R (X8DTT-HIBXF+, X8DTT-HIBQF+)
BIOS
32 Mb AMI SPI Flash ROM (each serverboard)
Memory Capacity (each Serverboard)
Twelve 240-pin DIMM sockets that can support up to 192 GB of registered ECC
DDR3-1333/1066/800 SDRAM (384 GB for the system)
Note: interleaved memory requires DIMMs to be installed in pairs - refer to Section 5-6 for
details.
Serial ATA Controller
Intel ICH10R on-chip controller to support six 3 Gb/s Serial ATA (RAID 0, 1)
SATA Drive Bays
Twelve hot-swap drive bays to house standard SATA drives (six per node)
PCI Expansion
Two standard size PCI Express x16 cards (one per node) with pre-installed riser
cards