Filter
Top Products
1-3
Chapter 1: Introduction
Onboard Controllers/Ports
One fl oppy drive controller and one onboard ATA/100 controller are provided to
support up to two IDE hard drives or ATAPI devices. The color-coded I/O ports
include one COM port, a VGA (monitor) port, two USB 2.0 ports, PS/2 mouse and
keyboard ports and two gigabit Ethernet ports.
ATI Graphics Controller
The H8QME-2+/H8QM8-2+ features an integrated ATI video controller based on the
ES1000 graphics chip. The ES1000 was designed specifi cally for servers, featuring
low power consumption, high reliability and superior longevity.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Server Chassis Features
The AS1041M-T2/1041M-82 is a high-end, scaleable server platform built upon the
SC818TQ+-1000/SC818S+-1000 1U server chassis. The following is a general
outline of the main features of the SC818TQ+-1000/SC818S+-1000 chassis.
System Power
The SC818TQ+-1000/SC818S+-1000 features a single, cold-swappable 1000W
power supply. Power must be removed from the system before servicing or replac-
ing the power supply.
SATA/SCSI Drives
The SC818TQ+-1000/SC818S+-1000 chassis was designed to support three SATA
(1041M-T2) or SCSI (1041M-82) hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SATA/SCSI drives.