Filter
Top Products
2-1
Chapter 2: System Safety
Chapter 2
System Safety
2-1 Overview
This chapter provides a quick setup checklist to get your chassis up and running.
Following the steps in the order given should enable you to have your chassis set up
and operational within a minimal amount of time. This quick setup assumes that you
are an experienced technician, familiar with common concepts and terminology.
2-2 Warnings and Precautions
You should inspect the box the chassis was shipped in and note if it was damaged
in any way. If the chassis itself shows damage, le a damage claim with carrier
who delivered your system.
Decide on a suitable location for the rack unit that will hold that chassis. It should
be situated in a clean, dust-free area that is well ventilated. Avoid areas where heat,
electrical noise and electromagnetic elds are generated.
The system must be placed near at least one grounded power outlet. When con-
gured, the SC743 chassis includes at least one power supply, "R" model chassis
may include up to three redundant power supplies.
2-3 Preparing for Setup
The SC743 chassis may stand as a tower or bolt directly to a rack. The mounting
screws you will need to install the systems into the rack are included. Please read
this manual in its entirety before you begin the installation procedure.