Filter
Top Products
SCF418 Chassis Manual
5-24
Figure 5-24: Assembling the PCIE Slot Bracket and Riser Card
Assembling the PCIE Slot Bracket Assembly
Each node supports one expansion card. This expansion card must be plugged into
a riser card, which in turn plugs into the motherboard.
Assembling the PCIE Slot Bracket Assembly
1. Remove the node from the chassis as described in Section 5-2, remove the
node from the chassis as described in Section 5-4 and remove the cover from
the node as described in Section 5-5.
2. Open the PCIE slot clip and remove the PCIE slot shield. (See the illustration
on the previous page)
3. Remove the three mounting screws securing the PCIE slot bracket to the
node.
4. Lift the PCIE slot bracket out of the node.
Riser Card
PCIE Slot
Bracket
Card
Mounting
Screws