Filter
Top Products
SCF418 Chassis Manual
5-8
Removing 2.5" Hard Drive Carriers from the Node
1. Press the release button on the drive carrier. This extends the drive bay
handle.
2. Use the handle to pull the drive carrier out of the chassis.
Figure 5-8: Removing a 2.5" Hard Drive Carrier
(Your node may differ slightly from the one shown in this illustration)
1
2
5-8 Installing and Removing Hard Drives
Note that if a node is pulled out of the chassis, the hard drives associated with
that node will power down as well. 2.5" hard drives are hot-swappable and may be
removed from the node without removing the node from the chassis or powering
down the system.
Only enterprise level hard drives are recommended for use in Supermicro chassis.
Installing and Removing 2.5" Hard Drives