Filter
Top Products
6
Jam Free Technology in manual
feed slot
Sensors in the paper feed area measure the thickness of
paper about to be shredded. The ability to shred or not is
communicated through red and green lighting. Green means
that the stack of paper is within the shredders sheet capacity
and OK to shred. Red means that you have too much paper,
remove some sheets in order to shred.
Since the shredder is unable to shred more sheets of paper
than it is capable of shredding, paper jams are prevented.
Loading door lock mechanism
For additional security the paper loading door can be locked
during the shredding of condential material.
To lock shredder:
1
Place documents in tray. Close paper loading door (see g 2).
2
Press any 4 digits. REMEMBER YOUR CODE!
Shredder unlocks automatically when:
• 4 digit code is re-entered.
• Shredding is complete.
• Shredder is inactive for 30 minutes (but documents remain
in tray)
Bin or Loading Door Open Safety
Function
As a safety precaution, if the bin or loading door is opened
during shredding, the shredder will stop and the Bin Full
indicator will illuminate.
Auto-feed Technology
The Stack and Shred 500X has been designed to automatically
shred up to 500 sheets from the auto-feed chamber and up
to 10 sheets through the manual feed slot. The auto-feed
mechanism has been designed to handle paper fastened with
staples and paper clips and to only pull a few sheets of paper
into the cutting mechanism to minimize the risk of paper jams.
Illuminated Icons Explained
Lock Bin Full/ Oiling in Oil Paper Auto Jam
Door Open Operation Level Jam Free
Indicator
Colour of symbol Green Red Red Green Red Red Blue Green Red
Power ON/OFF switch OFF
Sleep mode
Power ON/OFF switch ON
Stand by
Auto mode light light
Continuous jam boost mode light light
Reverse mode light light light
Paper loading door open light light light
Bin full/bin door open light light light
Motor is cooling down
Paper jam light light light
Too many sheets are being fed into manual feed slot light light
Cutters are self-cleaning flashing light light
Anti Jam sensing continuous
Entering PIN password flashing light
Paper loading door is locked light light
Incorrect PIN password has been entered flashing x3 light
Correct PIN password re-entered flashing x3 light
Auto Feed Operation light flashing
Oil Level too Low light light light
Auto/Manual Oiling light light light
LED Decal/Indicators
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, the EX100-07
will automatically reverse and forward the engine three times
to clear a jam. If after this auto jam clearance cycle the shred-
der still has a paper jam, the jam indicator will continue to
illuminate . Try clearing the jam using the reverse (F) and
continuous jam boost (G) buttons. If this is unsuccessful, open
the loading door (I), remove the remaining stack of paper,
then pull the jammed paper free of the cutting mechanism.