Filter
Top Products
8
Maintenance
The rollers on the auto-feed mechanism may become dirty over
time, please wipe clean with a dry cloth to maintain maximum
product performance (see g 10).
The auto-start infra-red sensor, located in the paper feed
entry-slot, can occasionally become covered in paper-dust
causing the shredder to run despite no paper being fed into
the machine. Switch the shredder off at the rear of the
machine and carefully clean the sensor using a cotton-swab
(see g 12).
Self-cleaning Cutters
After emptying and replacing a full bin, the shredder will run
in reverse for 4 seconds, stop for 2 seconds and then forward
for 4 seconds to clear away any remaining paper from the
cutter mechanism. This unique ‘self-cleaning’ mechanism is
additional jam prevention technology from Swingline.
Credit Card Shredding
The Stack and Shred 500X can shred credit cards. Switch the
shredder to auto mode, then;
1 Lift up the paper loading door (see g 5).
2 Insert the credit card into the roller as shown in g 8. Only
shred one (1) credit card at a time.
3 Close the paper loading door (see g 2).
Comb Bind Removal Hooks
Note – Use only on standard CombBind strips.
1 Open bin door.
2 Place document onto the comb bind hooks (see g 9).
3 Pull down on the document to remove comb strip.
Swingline encourages customers to recycle shredded
paper. Please note that shredded paper cannot be
recycled if mixed with credit card shards. If recycling,
please separate shredded paper and credit cards.
Service
Your shredder comes with a 2-year on-site service included.
Bin Full
The shredder will not function when the bin is full and the bin
full symbol (
) is illuminated. You should empty the bin.
• Open the door and slide out the waste sack support frame.
• Carefully remove the waste sack from the frame.
Shredder Accessories
We recommend that a paper waste bag for recycling shredded
paper is used on all models.
Accessory Part Number
Recycling Waste Bag 1765030EU
Oil Rell Bottle 1760049