Filter
Top Products
8
P360/460
Memory Scanne r
Scan the entire symbol
• The scan beam must cross every bar and space on the symbol
(as in the left bar code below).
• The larger the symbol, the farther away you should hold the
scanner.
• Hold the scanner closer for symbols with bars that are close
together.
Right Wrong
What Does The Beep Mean?
When you hear 1 beep (short high tone) it means data has been
decoded successfully. If any other beeps are heard, contact the
technical person in charge of scanning.
Troubleshooting
If the scanner does not work after you’ve followed these operating
instructions:
• Check the system power.
• Check that scanning is enabled.
• Check that the battery is installed correctly.
• Check for loose cable connections.
• Be sure the Phaser is programmed to read the type of bar code
you are trying to scan.
• Check to be sure the symbol is not defaced.
Cleaning
Wipe the scanner window periodically with a lens tissue or other
material suitable for cleaning optical material, such as eyeglasses.
Caution: Do not pour, spray or spill any liquid on the scanner.