Filter
Top Products
2
P360/460
Memory Scanne r
Setting up the Phaser
Installing the Cable
Note that the P 360 does not have a cable interface.
There are two kinds of cables that attach to the Phaser:
- an RS-232 which connects directly to a host
- a Synapse Adapter cable that connects to a Synapse Smart
Cable.
To Install a Synapse Smart Cable
Refer to the instructions from the Synapse cable.
To Install an RS-232 Cable
1. Switch off all devices connected to the Phaser cable.
2. Plug the modular connector on the cable into the receptacle in
the bottom of the Phaser handle.
The twist-
lock can be
slipped down
the cable to
facilitate
connecting.