TAG 1000 Laptop User Manual


 
MIL-BOOK™
OPERATORS MANUAL
- 1-15 -
Figure 1-9 Auxiliary Battery Pack
1.5.15 Parallel Port
The MIL-BOOK 1000 includes a 25-pin, D-type parallel port for connecting a
parallel printer or another external parallel device, such as an external floppy disk
drive. The parallel port supports both EPP/ECP functions. The parallel port is
located on the rear panel of the MIL-BOOK 1000.
1.5.16 VGA Port
The MIL-BOOK 1000 includes one 15-pin, sub-D VGA analog port for
connecting an external monitor. It is accessible on the rear panel of the MIL-
BOOK 1000. It is not necessary to connect an external monitor to the MIL-BOOK
1000, but by using an external, you can achieve higher resolutions than on the
internal flat panel display.
1.5.17 USB2.0 Port
The MIL-BOOK 1000 provides a USB2.0 (Universal Serial Bus) port for
connecting USB compliant devices. Most peripheral devices require the user to
shutdown the system, plug in the device and restart the system in order to use the
new device. USB devices can be conveniently connected and disconnected while
the system is running. The USB port transfers data at 480 MB/sec. Please refer to
the device-specific documentation for information on connecting and using USB
devices. The USB port is located on the rear panel of the MIL-BOOK 1000.