Copyright © TANDBERG 2008 Reference Guide Version 3.0 rev 3.0 10
The "log" array consists of structures which contain the following fields.
Field Type Comments
time dateTime.iso8601
The time of the last reboot.
reason String The reason for the reboot (one of unknown, User
requested shutdown
or User requested
upgrade
).
3.5 gatekeeper.query
Retrieves the gatekeeper settings and current status for an MCU or IP VCR. Takes no parameters.
Response Type Comments
gatekeeperUsage String One of disabled, enabled or required.
The following parameters are all optional and will only be present if gatekeeperUsage is not disabled.
address String The address of the gatekeeper.
dnsStatus String The status of the DNS resolution: one of
inProgress, resolved or failed.
ip String If the dnsStatus is resolved, contains the IP
address of the gatekeeper.
activeRegistrations Integer The number of active registration.
pendingRegistrations Integer The number of registrations in progress.
registrationPrefix String The registration prefix used by the device
h323ID String The h323 id used by the device.
mcuServicePrefix String The service prefix used by the device.
scheduledConferenceIDRegistration String The value enabled or disabled; corresponds
to web interface "ID registration for
scheduled conferences" option.
This field is only present for MCU product
types, and only for MCU software versions
2.2(1.3) onwards.
h323IDStatus String
mcuServicePrefixStatus String
The current status of the ID/service prefix
registration process. One of idle,
registering, registered,
deregistering,
pendingReregistration, waitingRetry,
noID or idTooLong.
3.6 sip.query
Retrieves information on SIP configuration for an MCU or IP VCR. Takes no parameters.
Response Type Comments
configuredRegistrar String The currently configured SIP registrar
address. This corresponds to the “SIP
registrar address” on the Settings >SIP
web page, and will be an empty string value
if there is no currently configured SIP
registrar.
configuredProxy String The currently configured SIP proxy address.
This corresponds to the “SIP proxy address”
on the Settings > SIP web page, and will
be an empty string value if there is no