TANDBERG 3.0 Computer Monitor User Manual


 
Copyright © TANDBERG 2008 Reference Guide Version 3.0 rev 3.0 36
5.5 recording.stop
This method stops a recording in progress on the IP VCR software version 2.2(1.15) and later. The connection
between the IP VCR and the endpoint (or endpoints) involved in the call will be dropped.
Parameter Type Comments
recordingId Integer The recording ID for the recording to stop. This
should be the recordingId as returned by
recording.enumerate.
A "no such recording" fault is returned if the recording does not exist or is not in the process of being
recorded; this method has an effect only on those recordings whose status value as returned by
“recording.enumerate” is recording.
5.6 folder.enumerate
This function enumerates all subfolders of a folder.
Parameter Type Comments
enumerateID (optional) String An enumerateID, as specified in section 2.
This returns the following structure:
Response Type Comments
enumerateID (optional) String An enumerateID, as specified in section 2.
folders array of structures
See below for layout of the structures.
The "folders" array contains the following structures:
Field Type Comments
folderName String The name of the folder.
folderId Integer A unique identifier for this folder.
parentFolderId (optional) Integer The unique identifier for the parent folder of this
folder. This is not present if the folder has no
parent (i.e. is the top level folder).
externalPath (optional) String The external NFS path. Only present if there is
an external path configured.
exportRecordings (optional) Boolean Set to true if recordings in this folder are
exported via NFS. Only present if there is an
external path configured.
registerWithGatekeeper
(optional)
Boolean Set to true if the recordings exported externally
in this folder are to be registered with the
gatekeeper. Only present if there is an external
path configured.
public Boolean Set to true if this folder is publicly accessible.
pin String Contains the PIN of this folder.
autoAttendantId String
recordingId String
recordingConsoleId String
The numerical ids used to access these functions.
Note that these are not the same as other
instances of similar names, e.g. recordingId.
These must be unique across the device.