Filter
Top Products
Copyright © TANDBERG 2008 Reference Guide Version 3.0 rev 3.0 31
Field Type Comments
callIdentifier base64 The h323 id of this caller.
borderWidth Integer 0 (no border), or 1, 2, or 3 for +1/+2/+3.
autoAttendantConfiguredName String If this participant is connected to an auto
attendant, this field holds the name of that
auto attendant: the value will change as the
user navigates through an MCU’s configured
menu structure.
mediaEncryption String One of the following values:
encrypted - all media channels to and from
this endpoint are encrypted
unencrypted - all media channels to and
from this endpoint are encrypted
mixed - some channels are encrypted and
some not
unknown - none of the above; this may
occur when a participant has very recently
connected and no media channels have been
established yet
audioRxEnergyMillidB Integer The measured energy of a participant's audio
sent to the MCU. Typically this will be a
negative value in the range -30000 (-30dB for
very quiet) and 0 (very loud).
audioRxMutedRemotely Boolean Whether this endpoint is muted remotely.
Note: This participant information is returned for all participants added to the conference using the
participant.add method, even after they have disconnected. However, this information is only returned for
other participants (i.e. those added via the web interface or those who dialed into the conference) whilst they
are connected but not after they have disconnected.
4.17 participant.fecc
Parameter Type Comments
conferenceName String
autoAttendantUniqueId String
participantName String
participantProtocol String
participantType String
Participant identification as described above.
direction String One of: up, down, left, right, zoomIn, zoomOut,
focusIn, focusOut.
4.18 participant.message
Puts a message on the display of a given participant.
Parameter Type Comments
conferenceName String
autoAttendantUniqueId String
participantName String
participantProtocol String
participantType String
Participant identification as described above.
message String The string to send to the participant.