Filter
Top Products
TANDBERG GW Data port Command Interface User Guide
20
VideoPortal
Registers the 3G Gateway with the VideoPortal
NOTE! The GW needs to reboot before the changes will take effect.
Mode <On/Off>
or
System [1 .. 2] IP Address <IPAddr>
---
sub-commands:
• Mode: If Mode = On the 3G Gateway is registered with 1 or 2 video
portals
• Address: IP address of the Video Portal the 3G Gateway is to be
registered to.
Example of VideoPortal feedback:
*c xConfiguration VideoPortal Mode: On
*c xConfiguration VideoPortal System 1 Address: "10.31.1.8"
*c xConfiguration VideoPortal System 2 Address: "127.0.0.1"