Filter
Top Products
TANDBERG Video Portal Data port Command Interface User Guide
• Cause: <1…> Cause code specifying why the command was not accepted by the system
• Description Textual description of the cause code.
Example:
xCommand feedbackregister url:http://10.47.14.185:8000
expression.1:status/call
expression.2:status/conference
*r Result (status=OK):
ID: 2
*r/end
OK
OptionKeyAdd
Command used to set new option keys.
Parameters:
• Key(r): <S: 0, 90> option key
NOTE! Always reboot the system after adding option keys, for the option key to take effect.
Example:
Xcommand OptionKeyAdd 115201P1-1-6A96DAA4
*r Result (status=OK): /
*r/end
OK
OptionKeyDelete
Command used to delete option keys.
Parameters:
• Key(r): <S: 0, 90> option key
Example (Delete Option Key nr. 1):
xCommand OptionKeyDelete 1
*r Result (status=OK): /
*r/end
OK
RestoreDefaultServices
Command used to restore the factory default services.
Example:
Xcommand RestoreDefaultServices
*r Result (status=OK): /
*r/end
OK
ServiceEntryDelete
Command used to delete services from the Video Portal.
Parameters:
• ServiceEntryNumber(r): <1..100>
D1392602 30