Filter
Top Products
8
Configuring the Media blade
Step one: Log in to the Media blade
All administration of the Media blade is performed via the web interface.
To log in to the web interface of the Media blade:
1 Log in to the Supervisor’s web interface.
2Go to
Hardware > Blades and click the IP address of the Media blade.
3Click
Log in, and then click Change log in and enter the user name admin with
no password.
Step two: Using an H.323 gatekeeper or SIP registrar (optional)
If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for
participants to call in to a conference. You can configure the Media blade to use an
external gatekeeper or its own built-in gatekeeper. For information about using the
built-in gatekeeper, refer to the online help.
If you have SIP endpoints, using a SIP registrar can make it easier for participants to
call in to a conference.
To configure the Media blade to use an H.323 gatekeeper:
1 In the web interface of the Media blade, go to
Settings > Gatekeeper.
2Enable
H.323 gatekeeper usage and configure the settings you require, using
the online help for further assistance.
3Click
Apply changes.
To configure the Media blade to use a SIP registrar:
1 In the web interface, go to
Settings > SIP.
2 Configure the settings you require, using the online help for further assistance.
3Click
Apply changes.
Codian recommends that you change the admin account to use a
password as soon as possible. To do that, go to
Users, click the admin
link, and provide the required user information.
Before you configure the Media blade to use, and register conferences to,
a SIP registrar, you must set up the Media blade and its conferences on
that SIP registrar.
i
i