Filter
Top Products
10
Using the Media blade
Creating conferences
To create a conference:
1 In the web interface of the Media blade, go to
Conferences and click Add new
conference
.
2Type a
Name for the conference, for example SalesMeeting.
3 Type an optional numeric identifier, for example
123. This will be the
telephone number that participants can use to join the conference when calling
in to the Media blade via a gatekeeper or SIP registrar.
4 If you are using a gatekeeper, check
H.323 gatekeeper; if you are using a SIP
registrar, check
SIP registrar.
5 Ensure the
Maximum duration of the conference is sufficient (the default is one
hour).
6 All other values can be left at their default settings. Refer to the online help for
further information about the available settings.
7 Scroll down and click
Add conference.
The conference you have created is now active (if you used the default immediate
start time) and participants can join in one of two ways: either the Media blade can
call out to specified endpoints or endpoints can dial in. Any endpoints that have been
added to a conference, as pre-configured participants, will be called in to the
conference by the Media blade.
There are two types of conference participant: chairperson and guest.
IDs and PINs allow participants to connect to conferences as the correct
participant type. Chairperson participants use the Numeric ID and
optionally, the PIN; guest participants use the Guest numeric ID and
optionally, the Guest PIN. For more information, refer to the online help.
Note that if you do not configure the conference to start immediately, it
will become a scheduled conference and will be inactive until its start
time.
i
i