Filter
Top Products
16
Step-By-Step-Operation Guide
9
Monitor selection
Press the MONITOR "L-R" switch on.
10 Monitor level
Turn the MONITOR level control up to the
12 o'clock position.
11 TRIM adjustment
While speaking into the microphone, slowly
push the TRIM control in channel 1. You
will hear your voice on the left side in the
headphones.
When using a line level source (such as
electronic instruments) instead of a
microphone, the TRIM does not need to be
pushed up very far, if at all.
MONITORL-R
‘
How to Record on Track 1
As a trial, let's record your voice on tape.
1 Have in hand a new cassette tape (Type II,
C-90 length or shorter).
2 Loading a cassette
Pull the cassette door open. Insert your
cassette tape. Close the door.
3 Getting past the leader tape
Press PLAY and allow the tape to run for
about 5 seconds. This will run the tape
leader onto the take-up reel, and put the
beginning of the tape in front of the heads.
4 Resetting the counter
Reset the tape counter to 000 by pressing
the adjacent button.
5 Selecting tracks
Set the RECORD FUNCTION switch for
track 1 to its L position. The track's REC
indicator will start blinking, indicating that
the track is in Record Ready mode.
‘
‘ ‘