Filter
Top Products
4
The PORTASTUDIO 414 MKII is...
The PORTASTUDIO 414 MKII is a 4-track "Multi-
track Master" cassette tape recorder and a full-
function mixer with 8 inputs/stereo outputs including
a balanced microphone input and a dedicated guitar
input combined into a single workstation.
Its high audio quality and creative flexibility reflect
the experience and innovation that have allowed
TASCAM to earn its reputation in professional audio
production fields, and its user-friendly design makes
the 414 MKII suitable for anyone, from expert to
novice.
Using this manual : To get the most out of your
414 MKII, please take the time to read through this
manual. Some time spent now will keep you from
overlooking some of the features that make the 414
MKII a more creative tool. You may discover some
new tricks you haven't tried before.
Use of capital letters : In general, we use all upper
case type to designate a particular switch, control,
jack name or label (like PAN). Transport modes and
some features are described with an upper case first
letter (like Record mode).
CAUTION
To power the PORTASTUDIO 414 MKII, use
only the provided PS-P414 AC adaptor.
Using any other adaptor will cause damage
to the 414 MKII, and such damage would not
be covered by the limited warranty on the
product.
About the weld line
There is a patterned stripe-like effect on the
bottom surface of the 414 MKII unit. This
effect is called a "weld line" and is a natural
result of the resin molding process
employed in the manufacture of the
414 MKII unit. It is not a crack or scratch,
and will cause no problems with the
operation of the 414 MKII unit.
NOTE FOR U.K. CUSTOMERS
DO NOT cut off the mains plug from this
equipment. If the plug fitted is not suitable for the
power points in your home or the cable is too short
to reach a power point, then obtain an appropriate
safety approved extension lead or consult your
dealer.
If nonetheless the mains plug is cut off, remove the
fuse and dispose of the plug immediately, to avoid a
possible shock hazard by inadvertent connection to
the mains supply.
If this product is not provided with a mains plug, or
one has to be fitted, then follow the instructions
given below:
IMPORTANT. DO NOT make any connection to the
larger terminal which is marked with the letter E or
by the safety earth symbol ç or coloured GREEN
or GREEN-and-YELLOW.
The wires in the mains lead on this product are
coloured in accordance with the following code:
BLUE: NEUTRAL
BROWN: LIVE
As these colours may not correspond with the
coloured markings identifying the terminals in your
plug proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked with the
letter N or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal which is marked with the
letter L or coloured RED.
When replacing the fuse only a correctly rated
approved type should be used and be sure to re-fit
the fuse cover.
IF IN DOUBT — CONSULT A COMPETENT
ELECTRICIAN.