Filter
Top Products
PMP200XL Models
Owner’s Manual
F
U
S
E
1
2
3
4
5
6
7
8
9
10
Location of Controls
1. ON/OFF Power Switch
2. Green LED Indicator Light
3. Protective Outlet Cover
4. 110/120 Volt AC Outlet
5. Cooling Fan
6. Red LED Indicator Light
7. 12Volt DC Power Cord
8. Clips For Power Cord
9. Fuse Cover
10. 25Amp Fuse
2
Welcome
This COLEMAN® product has been carefully engineered and manufactured
to give you dependable operation. Please read this manual thoroughly before
operating your new COLEMAN® product, as it contains the information you
need to become familiar with its features and obtain the performance that will
bring you continued enjoyment for many years. Please keep this manual on file
for future reference.
About COLEMAN® Inverters
The new line of super-efficient COLEMAN® power inverters are innovative in
design and have the highest surge capability in the industry. These extremely
advanced, microprocessor controlled units run cooler and more reliable than
any in their class. Their superior surge capability allows them to start even
the most difficult loads, including color televisions, TV/VCR combinations,
microwaves, refrigeration units, even small air conditioners! They also sport
the highest efficiency available (up to 80%) which translates into longer running
time and extended battery life. Inverters convert low voltage, direct current (DC)
to 110/120-volt alternating current (AC). Depending on the model and its rated
capacity, the inverters draw power either from standard 12-volt automobile and
marine batteries or from portable high power 12-volt sources.
Getting Started
When you turn on an appliance or a tool that operates using a motor or a tube,
(such as a television), it requires an initial surge of power to start up. This surge
of power is referred to as the “starting load” or “peak load”.
Once started, the appliance or tool requires less power to continue to operate.
This is referred to as the “continuous load.” You will need to determine how
much power your appliance or tool requires to start up (peak power) and it’s
continued operating power requirements (continuous load). Power consumption
is rated either wattage (watts) or amperes (amps). This information is usually
stamped or printed on most appliances and equipment. If this information is
not indicated on the actual product, check the owner’s appliance or equipment,
check the owner’s manual or contact the manufacturer to determine the power
consumption. Be sure that the power consumption of the item you wish to
operate is rated at 200 watts or less.
Multiply: AMPS X 110/120 (AC voltage) = WATTS
This formula yields a close approximation of the continuous load of the
appliance. All COLEMAN® inverters are designed to automatically shut down in
the event of a power overload. This protection feature prevents damage to the
unit while testing items with ratings in the 200-watt range.
1
PMP200XL_122205M.indd 6-7 12/22/05 9:09:47 AM