Filter
Top Products
Getting Set Up
18
Phaser 740 and 740L Laser Printers
Connecting to the parallel port
C
A
U
T
I
O
N
The maximum length for the parallel cable is 3 meters (10 ft.).
■ Use a high-density bi-directional parallel cable or a Tektronix 36-pin
high-density printer-to-25-pin DSUB PC cable (order number
012-1468-00). Otherwise, use a 36-pin to 36-pin parallel cable and the
parallel adapter supplied with the printer.
■ Connect the larger end of a parallel interface cable to your computer
and the smaller end of the cable to the printer’s parallel port.
N
O
T
E
If you are connecting a peripheral device (scanner or external hard drive),
follow the instructions “Connecting a SCSI peripheral device” on page 19.
Otherwise, refer to “Turn on the printer” on page 20.
3101-17