Filter
Top Products
Getting Set Up
Setup Guide
31
Set up the driver
1.
From the Apple menu, select Chooser.
2.
Click the icon of the printer driver (LaserWriter 8) on the left side of the
window.
3.
Click the Zone for your printer.
4.
Select your printer from the list of printers on the right side of the
window. If it is not in the list, check your hardware connections and
verify that you have selected the correct zone in the Chooser on the left
side of the window.
5.
Click Setup/Create to select the correct PPD (PostScript Printer
Description file).
6.
After the automatic setup has completed, click Setup and click
Configure.
7.
Select the options that are installed in your printer (for example,
memory configuration, Lower Tray Assembly, Duplex Unit). Setting
up the driver allows you to select all printer options when printing.
8.
Click OK.
9.
Close the Chooser.