Filter
Top Products
Windows NT
7
Setup Guide
41
Adding a Windows NT 4.0 driver on an NT 3.51 server
N
O
T
E
For proper installation, use the latest Windows NT 3.51 drivers and
Windows NT 4.0 drivers, available from the Tektronix web site:
www.tek.com/Color_Printers/support/software.html
The following procedure describes how to set up the Windows NT 3.51 server to
automatically load a Windows NT 4.0 driver on a Windows NT 4.0 client.
N
O
T
E
You must have Administrator access on the Windows NT 3.51 server.
Add the printer
1.
From a Windows NT 4.0 client, click the right-mouse button on
Network Neighborhood. Select Find Computer.
2.
Type the name of the Windows NT 3.51 server. Press Enter.
3.
Double-click the Windows NT 3.51 server icon.
4.
Double-click the Windows NT 3.51 server's Printers folder.
5.
In the Windows NT 3.51 server's Printers folder, double-click
Add Printer.
The first Add Printer Wizard dialog box should say Remote print
server <3.51 server name>.
6.
Select the port where the printer is connected.
N
O
T
E
If you do not have an Add Printer icon, then you are not logged on with an
account that has Administrator access on the Windows NT 3.51 server.
N
O
T
E
You cannot create a port on the Windows 3.51 server from the Windows 4.0
client; create the port on the Windows 3.51 server. After the port is created,
you can select that port from the Windows 4.0 client.