Filter
Top Products
7
Windows NT
42
PhaserShare Networking
Install the driver
1.
In the Add Printer Wizard dialog box, click Have Disk to add a new
Tektronix driver.
2.
Type the path name to the driver files. This can be A:\ if the files are
on a diskette. If these files were downloaded from an on-line service,
type the path name where they were saved. Click OK.
3.
Select the printer model and click Next.
Enter the printer’s name and set up sharing
1.
Type the printer's name; this can be any name you want. Click Next.
2.
If this printer is to be shared on the network, click Shared and
highlight all applicable platforms that may be connecting to this
server (Windows NT 4.0 x86 should be one). If desired, enter a Share
Name for the printer.
Windows NT creates the printer
1.
If you want Windows NT to print a test page after installing the printer
driver, click Yes (recommended). If you do not want the Windows NT
test page, click No. When finished, click Finish.
2.
When prompted for the Windows NT 3.51 CD-ROM, insert it into your
computer’s CD-ROM drive and click OK.
3.
Type the path name to the driver.
www.tek.com/Color_Printers/support/software.html
The printer should now exist on the Windows NT 3.51 server and have
Windows NT 4.0 drivers available. Now any Windows 4.0 client can use that
shared printer, and the driver is installed automatically.
N
O
T
E
For proper installation, you must use the latest Windows NT 3.51 drivers and
Windows NT 4.0 drivers, which are available from the Tektronix web site: