Filter
Top Products
Section 4
Using the Configuration Program
OMEGA Installation, Operation, and Maintenance Manual 41
Figure 4-1. COM Port Prompt
8.
Type the COM port number assigned to your computer’s serial
port (for example,
1
) and press Enter. The following menu
appears.
Figure 4-2. Main Menu
From this menu, you can:
c
Read the cellular telephone’s receive signal
see “Reading
the Cellular Telephone Signal,” below.
c
Program a telephone number into the OMEGA cellular
telephone
see “Programming a Telephone Number” on page
42.
c
Quit the program
see “Exiting the Configuration Program”
on page 44.
Reading the Cellular Telephone Signal
The OMEGA configuration program uses a bar graph as a visual
indication of the cellular telephone’s receive signal strength. Using
this feature, you can see whether the OMEGA’s cellular telephone
is in an area where cellular reception is strong or weak.
1.
With the Main Menu in Figure 4-2 displayed, press
1
at the
?
prompt. A bar graph similar to the one in Figure 4-3 appears,
showing the receive signal strength of the OMEGA’s cellular
telephone. The value shown to the left of the signal bar shows
the receive signal level. A value of –80 or above indicate a
strong signal. A value of –90 is normal. Values lower than -90
(such as –100 or –110) indicate a weak signal.