Telex Firefly P200 Projector User Manual


 
NOTE: The Alignment controls are functional only when the P200/P250
is not in “menu” mode.
MENU
This key controls the display of the on-screen controls “menu.” If an
on-screen controls “menu” item is displayed, pressing this key will make
the display disappear (on-screen displays normally disappear after five
seconds). To enter “menu” mode and access the on-screen controls,
press and release
MENU/RESET
, then press either the up or down
arrow key to “step” through the “menu” until the desired Menu Mode
On-Screen Control is displayed. When the P200/P250 is in on-screen
“menu” mode, only the Menu Mode On-Screen Controls are functional.
RESET
To reset the Firefly
P200/P250 image to the original factory settings,
press and hold
MENU/RESET
until the on-screen display indicates
READY TO RESET
(approximately five seconds). When the key is
released the P200/P250 will reset, clearing all image enhancements that
you have made, restoring the factory settings as the default settings. (If
MENU/RESET
is released before
READY TO RESET
is displayed, the
factory settings will not be restored.)
SOURCE
Press
SOURCE
to select video input from
COMPUTER
,
VIDEO
,
SVHS
jacks. If only one video source is “live,” the screen will go blank for a
moment, then return control to the “live” video source.
F1, F2
The
F1
and
F2
keys can be programmed as shortcuts to any Menu
Mode On-Screen control that you feel you regularly need to use without
going through the on-screen “menu” to access. To begin programming
the
F1
or
F2
key, first access the desired Menu Mode On-Screen
Control, then press
F1
or
F2
and the F1 on-screen graphic will appear.
Press
F1
or
F2
a second time to program the key for the selected Menu
Mode On-Screen Control. The
F1
or
F2
key will now access the
selected Menu Mode On-Screen Control. If you do not press
F1
or
F2
a
second time within five seconds, the
F1
and
F2
programs will remain
unchanged.
REPLACE LAMP
The
REPLACE LAMP
indicator lights when the lamp hour value reaches
zero. Use the
LAMP HOURS
On-Screen Control to reset the lamp hour
value and extinguish the
REPLACE LAMP
indicator.
POWER
Press
POWER
to turn off the projector and lamp. Press
POWER
again
to turn on the projector and lamp.
User Manual 15