Filter
Top Products
16
Ti36eng1.doc TI-36X II Manual Linda Bower Revised:
01/10/03 10:47 AM Printed: 01/10/03 10:47 AM Page 16 of
48
Stored Operations
The TI-36X
ü
stores two operations,
Op1
and
Op2
. To
store an operation to
Op1
or
Op2
and recall it:
1. Press
%b
or
%c
.
2. Enter the operation, beginning with an operator
(such as +,
M
,
Q
,
P
, or ^). You can store any
combination of numbers, operators, and menu items
and their arguments, to a limit of 47 characters or
items.
3. Press
V
to save the operation to memory.
4. Each subsequent time you press
2
or
3
, the
TI-36X
ü
recalls the stored operation and applies it
to the last answer. The expression with the stored
operation appears on the first line of the display,
and the result appears on the second line. A
counter on the left side of the result line displays the
number of consecutive times you have pressed
Op1
or
Op2
.
You can set the TI-36X
ü
to display only the counter
and the result, and not the expression on the entry line.
Press
%b
or
%c
, press
!
until the = is
highlighted (
û
) and press
V
. Repeat to toggle this
setting off.