Filter
Top Products
AD535_config
2-6
Description This is the AD535 configuration structure used to set up a codec channel.
You create and initialize this structure and then pass its address to the
AD535_config() function.
Example AD535_Config myConfig = {
AD535_LOOPBACK_DISABLE,
AD535_MICGAIN_OFF,
AD535_GAIN_0DB,
AD535_GAIN_0DB
};
AD535_config(hAD535,&myConfig);
Sets up AD535 using configuration structure
AD535_config
Function Void AD535_config(
AD535_Handle hAD535,
AD535_Config *config
);
Arguments hAD535 Handle to codec channel, see AD535_open()
Config Pointer to an initialized configuration structure, see
AD535_Config
Return Value none
Description Sets up the AD535 using the configuration structure. The values of the
structure are written to the AD535 control registers.
Example AD535_Config myConfig = {
AD535_LOOPBACK_DISABLE,
AD535_MICGAIN_OFF,
AD535_GAIN_0DB,
AD535_GAIN_0DB
};
AD535_config(hAD535,&myConfig);
Sets the FREE bit of an McBSP serial port to 1
AD553_freeMcbsp
Function Void AD535_freeMcbsp(
int port
)
Arguments port McBSP port: MCBSP_DEV0, MCBSP_DEV1
Return Value none