Filter
Top Products
8
To print horizontal wire wraps
1. Enter the text for the label.
2. Press + .
3. Use the arrow keys to move to
the desired wire gauge or
cable size, and press .
4. Press .
Printing Fixed Length Labels
Normally, the length of the label is determined by
the length of the text entered. However, you may
wish to make a label for a specific purpose that is a
fixed length regardless of the length of the text.
You can specify a fixed length for a label in 0.250”
(6 mm) increments between 0.500” (20 mm) and
40.000” (999.9 mm). The preset fixed length is 1.5”
(25 mm). Any change you make to the fixed length
setting remains in effect until you change it.
The amount of text that will print on the label
determines the minimum length of a label,
regardless of the fixed length you set manually. For
example, setting a fixed length of 0.50” for a label
with 20 characters would have no effect on the
label length.
To set the label length
1. Press .
2. Press
to increase the length.
3. Press
to decrease the length.
4. Press .
Printing Patch Panel Labels
Patch panel mode allows you to label a row of ports
on a patch panel. You select the distance between
ports, enter the desired text, serialize, and print.
The result is a long label with multiple, evenly
spaced text for each port. See Figure 15.
Figure 15
To print a patch panel label
1. Enter the text for the first position on the label.
2. Press .
3. Enter the distance between each label and
press . The default is 0.5” (12 mm) and the
value can be set in increments of 0.5” (12 mm)
up to 20” (480 mm).
4. Follow the directions in Serializing Your Labels
on page 9 to serialize the text that will print on
the label.
Printing Terminal Block Labels
Terminal block labels are very similar to patch
panel labels; however, the text is printed vertically.
See Figure 16.
Figure 16
To print a terminal block label
1. Enter the text for the first position on the label.
2. Press .
3. Enter the distance between each label and
press . The default is 0.5” (12 mm) and the
value can be set in increments of 0.05” (1 mm)
up to 20” (480 mm).
4. Follow the directions in Serializing Your Labels
on page 9 to serialize the desired number or
letter that will print on the label.
Figure 14
123 123
123 123
123 123
123 123
WRAP
Print
FIXED
FIXED
PP ANEL
01 02 03 04 05 06
PP ANEL
TBLOC K
01
02
03
04
TBLOC K
ILPLight.fm Page 8 Friday, November 21, 2003 11:43 AM