Filter
Top Products
3 SpeedTouch™ Web Interface
E-SIT-CTC-20030605-0003 v1.0
43
• Define a default server:
By specifying a default server IP address (e.g. 10.0.0.154 as shown above), all
incoming connections that don’t match a specifically configured static NAPT entry
will be forwarded to the device with this IP address. This setting should be
adequate for most server applications and eliminates the need for specific static
NAPT entries.
• Configure UPnP:
The three UPnP configuration options are:
• Full:
The SpeedTouch™ is UPnP enabled, all local hosts are able to detect the
SpeedTouch™. Any local host is able to create port mappings for any local
device.
• Secure (default):
The SpeedTouch™ is UPnP enabled, all local hosts are able to detect the
SpeedTouch™. A local host is allowed to make port mappings for its own,
i.e. a local host is not allowed to create port mappings for other local
devices.
• Off:
The SpeedTouch™ is UPnP disabled, none of the local hosts is able to detect
the SpeedTouch™. Via UPnP no port mappings can be created.