Filter
Top Products
Chapter 5
Expert Configuration
E-DOC-CTC-20050429-0104 v1.0
136
5.4.1 ATM
Overview The ATM page consists of following sections:
Phonebook
QoS Book
Interfaces
Phonebook The SpeedTouch™ Phonebook is a repository for ATM connectivity information. A
number of pre-configured entries may already reside in the SpeedTouch™ Phonebook.
The Phonebook:
Allows you to use named connections.
Provides an instant overview of all possible connections.
Indicates whether hardware and software resources are actually assigned to
Phonebook entries.
Resolves conflicts when adding new connectivity information.
Adding a phonebook
entry
To add a new Phonebook entry:
1 Click New.
2 In the Name box, type the Connection Service Name.
3 In the Address box, type the Virtual Channel Identifiers (VPI and VCI) (for
example 8.35).
4 Click Apply.
Connection Service
Name
There are a few limitations on names:
A phonebook name cannot have spaces.
The name INCOMING is reserved for internal use.
For entries of connection service type PPPoA, planned to be used for the
Relayed PPPoA packet service, the phonebook name may not start with capital
P or T (Microsoft Windows OS restrictions).
Phonebook entries with a name starting with DHCP are reserved for the PPP-to-
DHCP spoofing feature of the SpeedTouch™.
Virtual Channel
Identifiers (VPI and VCI)
The address format is vpi*vci, e.g. 8*35; or vpi.vci, e.g. 8.35.
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) are two parameters
identifying ATM Virtual Channels.