Filter
Top Products
34 Gecko Frames Instruction Manual
Section 3 — Power Up
Power Connections
There are two types of power cords supplied with the 8900 Series frames
for 120 V and 240 V operation. Line voltage selection is not required for this
power supply. Optional redundant power supplies are also shipped with
both types of power cord.
120 VAC
This cord has a molded grounding plug at one end and a molded grounded
receptacle at the other end. Conductors are color-coded white (neutral),
black (line), and green or green/yellow (ground).
240 VAC
This cord has a molded grounding receptacle at one end and stripped con-
ductors at the other end. Conductors are color-coded light blue (neutral),
brown (line), and green/yellow (ground).
For each power supply installed, AC power is fed through a line cord to a
socket (J1 and J2) on the rear of the frame (Figure 16).
Figure 16. AC Power Connectors
Note To maintain maximum redundant power, ensure that each power supply cord
is plugged into a separate branch circuit.
0636 -05r1
J1
J2
RS232
ETHERNET