1. Press the ᕢ Weather On/Sleep button once to turn on the NOAA
weather report.
2. Slide the ƿ Weather Band switch to find the number position that
has the best reception for your area. They are as follows:
1 – 162.475MHz
2 – 162.450MHz
3 – 162.400MHz
4 – 162.425MHz
5 – 162.525MHz
6 – 162.500MHz
7 – 162.550MHz
3. Adjust the ƾ Volume control as desired.
4. Press the ᕤ Off/Reset button to turn the weather report off.
Important Information Regarding Weather Broadcasts
• The weather band broadcast transmission is a very low power and not
the same as the transmission of FM radio broadcasts.
•Weather band stations are located in specific geographical locations
and terrain, which means the area in which you live may not be within
the range of such a station. If you receive AM/FM stations in your area
without a problem, but cannot receive weather band information, you
may be beyond the range of the nearest weather station.
•To help improve the reception, move the antenna or rotate the unit until
you get the best reception. Reception also varies from daytime to
nighttime.
Listening to Nature Sounds
Important – If the ᕡ Sound On/Sleep button is pressed more than once
the unit will enter the sleep mode. At the bottom of the
display the calendar will change to the Sleep Time Indicator
(90, 60, 30, 15). The Sleep Volume Indicator will also
appear at the bottom of the display. Press the ᕤ Off/Reset
button to turn the weather off, then press the ᕢ Weather
On/Sleep button again (only once).
1. Press the ᕡ Sound On/Sleep button once to turn on the nature
sounds.
2. Press any of the four nature sound buttons ¹ Ƹ ƹ ƺ (Wind, Brook,
Forest, Ocean).
3. Adjust the ƾ Volume control as desired.
4. Press the ᕤ Off/Reset button to turn the nature sounds off.