Filter
Top Products
Wake to Nature Sounds
1. Set the Nature Sounds alarm time as indicated under Setting the Alarm
Time(s).
2. Follow the instructions under Listening to Nature Sounds to listen to
the nature sounds of your choice. Play the nature sound you wish
to wake to before turning the unit off. The last nature sound that
is played will be the same nature sound that will play when the alarm
turns on.
3. Adjust the ƾ Volume control to find the volume level that you wish to
wake to.
4. Press the ᕧ Sounds button. The Sounds Alarm Indicator will appear
on the top of the display. The weather alarm is now set to turn on at
the time it is set for.
Wake to Buzzer
1. Set the Buzzer alarm time as indicated under Setting the Alarm Time(s).
2. Press the ᕨ Buzzer button. The Buzzer Alarm Indicator will appear
on the top of the display. The buzzer alarm is now set to turn on at the
time it is set for.
Tur ning Off the Alarm(s)
1. After the alarm sounds, press the ᕤ Off/Reset button to turn off the
alarm. The alarm will be automatically reset to turn on at the same time
the following day.
Note: If more than 1 alarm is set, when you press the ᕤ Off/Reset button
to stop the alarm from sounding, this will not affect the other alarm(s)
from turning on at the time(s) they are set for.
2. To cancel any or all three of the alarms from turning on simply press the
ᕦ Weather button, ᕧ Sounds button, or ᕨ Buzzer button until the
alarm indicator(s) disappear from the top of the display.
3. If the alarm is not turned off after it sounds it will play for approximately
1 hour then turn off automatically. This cycle will repeat everyday the
alarm is set for (7•5•2) unless the controls are changed.
Snooze/Dimmer Operation
1. If you press the ᕣ Snooze/Dimmer bar after the alarm sounds, the
alarm will turn off for approximately 9 minutes then turn back on.
2. Using AC power, adjust the display’s back lighting by pressing the ᕣ
Snooze/Dimmer for Hi/Med/Low. Using DC power, press the ᕣ
Snooze/Dimmer to turn on the back light for 5 seconds.