Filter
Top Products
Section 4: Advanced Configuration 16
Basic Tab
Be sure to click Apply once you have made changes.
Forwarding Tab
Click ADD to create additional Port Forwarding rules.
Be sure to click Apply once you have made changes.
Port Forwarding Basic Tab Fields
Field or Button Description
Enable UPnP IGD
Enables Universal Plug and Play (UPnP)
Internet Gateway Device (IGD) profile to
allow certain Windows applications to setup
the port forwarding rule dynamically when
NAT is enabled on this device.
DMZ IP Address
Enter the DMZ IP Address.
Forwarding Tab Fields
Field or Button Description
Select
Select a box when you want to delete the
specific row.
Protocol
Select TCP (Transmission Control Protocol)
or UDP (User Datagram Protocol).
WAN Port Start
Enter the beginning port range for external
network access.
WAN Port End
Enter the ending port range for external
network access.
LAN IP Address
Enter the IP address to host the service in
the dotted-decimal format.
LAN Port Start
Enter the beginning port range for internal
network access.
LAN Port End
Enter the ending port range for internal
network access.
Enabled
Check to enable specific port forwarding.