Filter
Top Products
Xplorer 870
6969
10. DHCP SERVER
The DHCP Server setup entry comes with the following parameters:
Parameters Description Default Value
DHCP/DNS DHPC parameteres and
service DNS server addresses
DHCP server DHCP Server option Enable
System allocates System assigned address pool range. Off
address pool
Assign address Beginning and end address 2-33
pool range of the pool range.
Max Lease Time Maximum lease time for an 86400
IP address in seconds.
Primary DNS server Primary DNS server IP address
IP address provided by ISP. N/A
Secondary DNS server Secondary DNS server IP address
IP address provided by ISP. N/A
DNS Relay DNS Relay settings
DNS Relay For enabling DNS Relay Disable
Auto discovery To find DNS server automatically Off
Manual settings IP address for the DNS Rlay Off
The default configuration for DHCP server is enabled with 32 addresses from
192.168.1.2 to 192.168.1.33 for DHCP clients. While DHCP is enabled, you can
select "System allocates address pool"(The default setting is 32 IP addresses.) or
"Assign address pool range" (To Manually assign IP address range.)
Note: The DNS IP MUST be set to a valid value to enable the DHCP server to deliver the DNS IP
to the host. Consult your ISP for DNS IP address. You may input the secondary DNS IP if there
are two DNS servers in your network.
HANDL. XPL 870 24/6/02 3:34 pm Pagina 69