Filter
Top Products
Xplorer 870
Setup DNS Relay
The default configuration for DNS Relay is disabled. While DNS Relay is enabled,
you can select "Auto-discovery" (This is only available while PPPoA/PPPoE is selected
for ATM PVC Configuration) or "Manual Setting" to assign remote DNS Server IP
address. (This is only available while RFC 1483 Routed or PPPoA/PPPoE is selected
for ATM PVC Configuration.). It is recommended to disable the DNS Relay and to
enter the DNS server addresses manually.
Note: To save the settings, select "Save Configuration" and then click "Save".
7070
HANDL. XPL 870 24/6/02 3:34 pm Pagina 70