Filter
Top Products
Toshiba TRR Page 15 7/02, Satellite
To remove the keyboard, follow the steps below.
1. Open the display panel.
2. Insert the fingernails of both hands into
notches in the keyboard brace and the
computer, and pry up to release the
brace at twelve points. Remove the
brace.
3. Remove one M2.5x4 black flat-head
screw securing the metal brace.
4. Remove two M2.5x2.6 black flat-head
screws.
5. Rotate the keyboard out and lay it on top
of the palmrest.
6. Disconnect the keyboard cable from
PJ2003 on the system board and remove
the keyboard.
Satellite 2400 Series Disassembly Overview, cont.
To remove the power switch board, follow the steps
below.
1. Disconnect the SUMI card from PJ2018.
2. Remove one M2.5x4 black flat-head
screw.
3. Remove the power switch board and
turn it over.
4. Disconnect the SUMI card from PJ7200.
To remove the top cover with display assembly,
follow the steps below.
1. Turn the computer upside down and
remove the following nineteen screws:
• Thirteen M2.5x6 black flat-head
• Six M2.5x5 black flat-head
2. Turn the computer right side up and open
the display panel.
3. Remove two M2.5x6 black screws and
two M2.5x16 black screws.
4. Remove the metal plate.
5. Disconnect the LCD/DL cable from
PJ5001 and the speaker cables from
PJ2020 and PJ2021 on the system
board.
6. Remove one M2x6 screw securing the
top cover.
7. Remove the top cover with display
assembly starting from the front. Be
careful not to damage the wireless LAN
antenna coaxial cables.
!
Images continued on the next page
"
#
!