Toshiba 242 All in One Printer User Manual


 
Department Code 145
Changing department names or codes
This section describes how to change the department names or codes already registered. Key
in the master code in the department code entry screen, and then proceed to the following
steps:
1
Press the [USER FUNCTIONS] button.
The “user functions mode” main screen is displayed.
2
Select “DEFAULT SETTINGS” with and buttons, and then
press the [ENTER] button.
3
Select “GENERAL SETTING” with and buttons, and then
press the [ENTER] button.
4
Select “DEPARTMENT CODE” with and buttons, and then
press the [ENTER] button.
USER FUNCTIONS
1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
GENERAL SETTING
04.WEEKLY TIMER
05.SPEAKER VOLUME
06.DEPARTMENT CODE