Filter
Top Products
2 HOW TO MAKE COPIES
52 Placing Originals
Placing Originals
Acceptable originals
Booklets, three-dimensional objects and some types of special media can be placed on the orig-
inal glass, as well as plain paper. When the Reversing Automatic Document Feeder (optional) /
Automatic Document Feeder (optional) is used, a stack of plain paper originals can be automat-
ically scanned one by one.
*1 The automatic size detection function is not enabled for A/B format.
*2 “Special media types” refers to special paper which is not acceptable for the Reversing Automatic Docu-
ment Feeder (optional) / Automatic Document Feeder (optional), such as overhead transparencies or
tracing paper.
*3 Do not place heavy objects (9 lb. or more) and do not press on it with force.
*4 The equipment detects the COMP size original automatically only when the mixed-size copying mode is
used.
*5 Their paper weight should be between 13.3 lb. and 33.8 lb (in both cases of 1-sided and 2-sided).
*6 Some media types may not be used.
*7 ST size originals must be placed in a landscape direction.
Maximum number of originals scanned in one go
Up to 250 original sheets can be scanned at one time. When the number of sheets to be
scanned exceeds 250 or the built-in memory in the equipment becomes full during the scanning
of the copy job, scanning stops and “Count over” or “Memory is full” appears on the LCD screen.
To copy the data scanned so far, select “Print”. To delete them, select “Cancel job”.
In the following cases, only data deletion is possible. After doing this, perform copying again with
the original divided.
y When sort copying for one set is performed
y When the magazine sort mode is selected
y When non-sort copying is performed (only when the number of sheets to be scanned
exceeds 250)
Setting position
Type of origi-
nals
Maximum
size
Acceptable sizes for auto-
matic size detection
*1
Remarks
Original glass Plain paper
Special media
types
*2
Booklets
3-dimensional
objects
11.69" x 17.01" LD, LG, LT, LT-R,
ST-R of standard sizes
*3
Reversing Automatic
Document Feeder
(optional) / Automatic
Document Feeder
(optional)
Plain paper LD, LG, LT, LT-R, COMP, ST-R
of standard sizes
*4, *5, *6, *7